5512A WCBF

ABOUT PRODUCT

With Electric Actuator
2/2-Way Motorised Control Valves with Electric Actuator.For Thermic Fluid Application (On-Off and Control duty).(Motorised to Open or Motorised to Closed Type.)

Size

15 mm (1/2”) to 150 mm (6”).

Pressure Rating

As per ANSI CI. 150,CI. 300, PN 16 & PN 25

Design Standard

ASME B16.34

Face to Face

As per DIN-3202.Part I Series F1.(All materials)

Type of Plug

On-Off, Equal percentage or Linear.

Body & Bonnet Material

CS-ASTM A 216 WCB (DIN 1.0619 GS-C 25). SS-ASTM A351 CF8M (DIN1.4408) (GX6 Cr.Ni Mo1810) SS-ASTM A351 CF8(DIN1.4301

Spindle

410/316 Ground, Burnished and Hard Chromed.

Hex. Nuts

ASTM A194 Gr. 2H

Range ability

Linear 50:1.

Note

5512A are Metal Seated Valves.

Housing

Aluminium Silicon alloy heat treated.

Electric Motor

Single phase, permanent split phase capacitor type class ‘F’ insulated motor.

Actuator Yoke

Steel rods with position indicator assembly or Cast Carbon Steel casting.

Control Suitability

Actuator is suitable for On-Off, Anticipatory, PI, PID Control system.

Unified Flanges

As per ANSI CI. 150 and PN 16.

Gland Packing

Carbon filled Teflon for temp. upto 380°C with Cooling Finned Bonnet.

Leakage

As per ANSI-FCI-70-2 CI.IV (0.01% of Kv) for 5512A Series

Testing Standard

ANSI-FCI-70-2

Seat

Screwed type replaceable.

Plug Material

SS AISI 420/316

Seat Ring

SS AISI 420/316

Studs

ASTM A193 Gr. B7.

Body Packing

Cr. Ni Foil coated with graphite.

Fluids

Hot Thermic Fluid, Hot Water,Hot Steam, etc

Electric Supply

220/240,110,24 Volts 50/60 Hz, AC

Switching cycles

Upto 240 cys per hour for small size valves and for large size valves refer to AVCON. (Switching cycles is meant for duration of less than 0.1 second).

Stem Tension

Through belleville packed spring.

Valve Position on

Stay put Failure of Electricity

Electric Actuator

Series KN

Gears

Steel, hobbed, toughened gears.

Technical Data

5512-1.pdf
5512-2.pdf

Diagrams

RELATED PRODUCTS