15 mm (1/2") to 80 mm (3")
|Body & Bonnet Material|
Investment casted ASTM-A, 351CF8 (St.St. 304) CF8M (St.St. 316) & CF3M (St.St.316L).
|Pressure Temp. rating|
As per ANSI Class 150
Standard BSP(F)/ NPT(F).
Soft seated Teflon
Viton / EPDM Buna Nitrile.
As per FCI-70-2 Teflon seating class IV. For other soft seating class VI. Drop Tight / Bubble Tight.
S.S. AISI 304/316.
On-Off, normally closed.
On steam-continuous 155°C Intermittent 180°C. with Teflon seating, Buna Nitrile 80°C., EPDM 135°C., VITON 180°C.
S.S. AISI 304 (deep drawn)
Pressure die casted, aluminium silicon alloy, solution treated and hard anodised.
Steel (deep drawm).
IS 4454 Grade III, duly painted
|Act. Working Signal Pressure|
3.5 to 5.5 bar, (Refer to Graph).
|Operating Cycles per hour|
15mm, 20mm, 25mm upto 600 cy/hr. 35mm and 50mm upto 500 cy/hr. (tested on air, on other fluids, this figure may vary).
Over one million cycles (lab tested in ideal condition).
Dry, Filtered instrument grade.
Position indicating limit switch box, solenoid valve, filter regulator gauge. Other accessories available on application.
For control of air, water, oil, gas, steam in textile, power generation, paper & pulp, chemical, petro chemical industries, PSA nitrogen system, air dryer, gas generator etc
All models Max. back pressure 2.5 bar.
6622E/6623E/ 6624E/ 6625E BSP/NPT (F)
2/2 Way Pneumatic Piston Operated Normally Opend Angle Seated Valves,
with Cylinder Actuator for On-Off Application Screwed BSP / NPT (F).
R Star Series
Pneumatic On/Off Valves
Pharma & Diaphragm Seated Valves
Angle Seated Valve