Size | 15mm (½”) to 50mm (2”) |
---|---|
Body & Bonnet Material | Investment casted ASTM-A, 351CF8 (St.St. 304) CF8M (St.St. 316). |
Pressure Temp. rating | As per ANSI Class 300 |
End Connection | Standard BSP(F) Optional-NPT(F) |
Seating | Soft seated Teflon backed by EPDM. Optional-VITON /EPDM, Buna Nitrile. |
Leakage Class | As per ANSI FCI 70-2, Teflon seating class IV. For other soft seating class VI Drop Tight/Bubble Tight. |
Trim | S.S. AISI 304/316. |
Stem Packing | Self adjusting, Spring loaded PTFE packing |
Characteristic | On-Off, normally closed / normally open |
Working Fluid Press | Refer to table below |
Working Temperature | On steam- continuous :155°C, Intermittent 180°C, with PTFE seating, Buna Nitrile 80°C, EPDM 135°C, VITON 180°C |
Cylinder, Cover, Body & Piston: | Glass filled polyamide., S.S. investment casted |
Piston Packing | Buna Nitrile |
Actuator Spring | IS 4454 Grade III, duly painted |
Act. Working Signal Pressure | 3.5 to 6 bar (refer to graph) |
Operating Cycles per hour | 15mm, 20mm, 25mm upto 600 cy/hr.,(tested on air, on other fluids this figure may vary). |
Life Expectancy | Over one million cycles (lab tested in ideal condition) |
Air Quality | Lubricated /Non-lubricated. |
Accessory | Air lock, position indicating limit switch box, solenoid valve, filter regulator gauge. Other accessories available on application |
Application | For control of air, water, oil, gas, steam in textile, power generation, paper & pulp, chemical, petro chemical industries, PSA nitrogen system, air dryer, gas generator and in process plants. |
Back Pressure | Generally all models are suitable for back pressure upto 2.5 bar. However for specific application where higher back pressure is expected, refer to ‘AVCON’. |
avcon@avconcontrols.com
022-69156100
022-28221505