5512A

ABOUT PRODUCT

With Electric Actuator
2/2-Way Motorised Control Valves with Electric Actuator. For On-Off and Control Application (Motorised to Open or Motorised to Close Type)

Size

15 mm (1/2”) to 150 mm (6”).

Pressure Rating

As per ANSI CI. 150,CI. 300, PN 16 & PN 25

Gear train

Carbon filled Teflon for temp. Upto 220OC

Leakage

As per ANSI-FCI-70-2 CI. IV(0.01% of Kv) for 5512A Series and Class VI-Bubble tight for 5512B Series.

Temperature

On-Off, Equal percentage or Linear.

Body & Bonnet Material

CS-ASTM A 216 WCB (DIN 1.0619 GS-C 25). SS-ASTM A351CF8M (DIN1.4408) (GX6 Cr.Ni MO1810) SS-ASTM A351CF8(DIN1.4301) SG Iron-IS 1865 Grade SG 400/15A.

Spindle

410/316 Ground, Burnished and Hard Chromed.

Hex. Nuts

ASTM A194 Gr. 2H

Range ability

Equal Percentage 30:1 Linear 50:1

Note

5512A are Metal Seated Valves. 5512B are Soft Seated Valves.

Gears

Steel, hobbed, toughened gears.

Switching cycles

Upto 240 cys per hour for small size valves and for large size valves refer to AVCON. (Switching cycles is meant for duration of less than 0.1 second).

Unified Flanges

As per ANSI CI. 150/300 and PN 16

Pressure Temp. rating

As per ASME B-16.34

Design Standard

ASME B16.34

Face to Face

As per DIN-3202.Part I Series F1.(All materials)

Testing Standard

ANSI-FCI-70-2

Seats

Screwed type replaceable

Plug Material

SS AISI 420/316

Seat Ring

SS AISI 420/316

Studs

ASTM A193 Gr. B7.

Ball seat

Cr. Ni Foil coated with graphite.

Fluids

Air, Water, Steam, Gas, etc

Electric Actuator

Series KN

Housing

Aluminium Silicon alloy heat treated.

Electric Supply

Single phase, permanent split phase capacitor type class ‘F’ insulated motor.

Valve Position on

Stay put Failure of Electricity

Control Suitability

Actuator is suitable for On-Off, Anticipatory, PI, PID Control system.

Technical Data

5512AB-1.pdf
5512AB-2.pdf

Diagrams

RELATED PRODUCTS