15 mm (1/2”) to 150 mm (6”).
As per ANSI CI. 150,CI. 300, PN 16 & PN 25
Glass filled Graphite Teflon for 380°C with cooling Finned Bonnet.
|Face to Face|
As per DIN-3202.Part I Series F1.(All materials)
|Type of Plug|
On-Off or Linear.
|Body & Bonnet Material|
CS-ASTM A216 WCB (DIN 1.0619 GS-C 25).
SS AISI 420
ASTM A193 Gr. B7.
Cr. Ni Foil coated with graphite
Hot Thermic Fluid, Hot Water,Hot Steam, etc
Nylon inserted high Neoprene, rollform type.
EN 47 , Cr. V. Steel
Cast carbon steel castings one piece
5512A are Metal Seated Valves.
As per ANSI CI. 150/300 and PN 16
|Pressure Temp. rating|
As per ASME B-16.34
As per ANSI-FCI-70-2 Cl. IV (0.01% of Kv).
Screwed type replaceable.
SS AISI 420
410 Ground, Burnished and Hard Chromed, Guided through a PTFE bearing, leakage prevented by Synthetic seal, protected by rubber bellow
ASTM A194 Gr. 2H
Equal Percentage 30:1 Linear 50:1
Steel pressing to IS 513CRCD.
-20°C to +80 °C
|Max. Pres. over|
Upto 4 bar
With Multispring Diaphragm Actuator
2-Way Pneumatic Control Valves with Multispring Diaphragm Actuator (Normally Closed Design),For Thermic Fluid Application.Field Reversible from Normally Closed to Normally Open,or Normally Open