15 mm (1/2”) to 150 mm (6”).
As per ANSI CI. 150,CI. 300, PN 16 & PN 25
|Face to Face|
As per DIN-3202.Part I Series F1.(All materials)
|Type of Plug|
On-Off, Equal percentage or Linear.
|Body & Bonnet Material|
CS-ASTM A 216 WCB (DIN 1.0619 GS-C 25). SS-ASTM A351 CF8M (DIN1.4408) (GX6 Cr.Ni Mo1810) SS-ASTM A351 CF8(DIN1.4301
410/316 Ground, Burnished and Hard Chromed.
ASTM A194 Gr. 2H
5512A are Metal Seated Valves.
Aluminium Silicon alloy heat treated.
Single phase, permanent split phase capacitor type class ‘F’ insulated motor.
Steel rods with position indicator assembly or Cast Carbon Steel casting.
Actuator is suitable for On-Off, Anticipatory, PI, PID Control system.
As per ANSI CI. 150 and PN 16.
Carbon filled Teflon for temp. upto 380°C with Cooling Finned Bonnet.
As per ANSI-FCI-70-2 CI.IV (0.01% of Kv) for 5512A Series
Screwed type replaceable.
SS AISI 420/316
SS AISI 420/316
ASTM A193 Gr. B7.
Cr. Ni Foil coated with graphite.
Hot Thermic Fluid, Hot Water,Hot Steam, etc
220/240,110,24 Volts 50/60 Hz, AC
Upto 240 cys per hour for small size valves and for large size valves refer to AVCON. (Switching cycles is meant for duration of less than 0.1 second).
Through belleville packed spring.
|Valve Position on|
Stay put Failure of Electricity
Steel, hobbed, toughened gears.
With Electric Actuator
2/2-Way Motorised Control Valves with Electric Actuator.For Thermic Fluid Application (On-Off and Control duty).(Motorised to Open or Motorised to Closed Type.)
R Star Series
Pneumatic On/Off Valves
Pharma & Diaphragm Seated Valves
Angle Seated Valve