6212M

ABOUT PRODUCT

with Engineering Plastic Hand Wheel

2/2-Way Angle Seated OD Based (As Per ASME BPE- 2012) Metal Body Valve with Engineering Plastic Hand Wheel. For On-Off Application (Rust Free Design).

Size	15mm (½”) to 50mm (2”)
Pressure Temp. rating	As per ASME B-16.34
Seating	Standard-Soft seat PTFE backed by EPDM. Optional-VITON/EPDM/ Buna Nitrile.
Trim	Standard-SS AISI 304, Optional-SS AISI 316
Hand Wheel	Eng. Plastic PA6 GF 30%
Working Fluid Press	Refer to table below
Max. Operating	20kg /cm2
Body & Bonnet Material	Standard-Invesment casted SS-ASTM A351 CF8 (DIN1.4301) (SS-304). Optional-Investment casted CF8M(SS-316) (DIN1.4408) (GX6 Cr. Ni MO1810).
End Connection	Spigot end (As per ASME BPE -2012)
Leakage	As per ANSI FCI-70-2 Teflon seating class IV. For other soft seating class VI. Drop Tight / Bubble Tight.
Stem Packing	Self adjusting, Spring loaded PTFE packing
Characteristic	On-Off
Working Temperature	On steam-continuous 155°C, Intermittent 180°C, EPDM 135°C, VITON 180°C.
Application	For control of air, water, oil, gas, steam in textile, power generation, paper & pulp, chemical, petrochemical industries, PSA nitrogen system, air dryer, gas generator and others.